Albertville

Helical piles in Albertville, Minnesota

Albertville sits in the northwest Twin Cities suburbs, where winter drives design. Under Minnesota Rules 1303.1600, minimum footing depth for frost protection is 3-1/2 feet in southern Zone II and five feet in northern Zone I, unless an engineer competent in soil mechanics determines otherwise. Confirm which zone applies with the local building department.

Helical piers are screwed through weak surface soil to bear on firmer layers, which makes them practical for decks, additions and repairs in finished yards. Crews watch installation torque and stop when the readings match the engineer's design load.

Helical pile companies serving Albertville

One listed company is based in Albertville:

• HELICO: installs helical piers for decks, additions and foundation repair, serving Plymouth, Maple Grove, Blaine, Monticello, Ramsey and Otsego.

Costs and what to ask

Nationally, helical piers typically run about $2,000 to $4,000 each installed, with an average near $3,000, according to Foundation Repair HQ, which notes that hand-digging around landscaping can add $200 to $500 per pier. Expect the Albertville total to track pier count, depth and access more than any flat rate. Read our helical pier cost guide before comparing bids. Questions worth asking any installer:

• Who is the engineer of record, and how was the pile depth chosen for the Albertville lot?
• Are torque readings recorded as each pile is driven, and are they given to you at closeout?
• Is the steel galvanized, and what shaft size and helix plates are specified?
• Does the quote include permits in Albertville and a written warranty on the work?

For wider options, see all Minnesota helical pile installers.